LPSW400
ଡିଏନ୫୦୦, ୨୦″Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
ବାହ୍ୟ ପାଇପର ସାମଗ୍ରୀChina Water Filling Machine, Machine୩.୨.୧ କ୍ଲାମ୍ପ ସହିତ ଭାକ୍ୟୁମ୍ ବେୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର
ଓଡେଲ୍
ସଂଯୋଗ
ପ୍ରକାର
ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ
ଡିଜାଇନ୍ ଚାପ
ସାମଗ୍ରୀ
ଭିତର ପାଇପର
ମାନାଙ୍କ
| Vମନ୍ତବ୍ୟ | 300 ସିରିଜ୍ ଷ୍ଟେନଲେସ୍ ଷ୍ଟିଲ୍ |
| |
| DN15, 1/2″ | DN10, 3/8″ | 8 ବାର୍ | ସୁପାରିଶ କରାଯାଇଛି ≤ DN25 କିମ୍ବା 1″। କିମ୍ବା ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବାୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର (DN10, 3/8″ ରୁ DN80, 3″), ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର VIP (DN10, 3/8″ ରୁ DN500, 20″) ଚୟନ କରେ। |
| ASME B31.3 | B ହେଉଛି 304L, | ||
| C ହେଉଛି 316, | No | No | D ହେଉଛି 316L, |
| Nominal Diameter of Inner Pipe | ଏଚଏଲପିଡି | ବି୦୧୫୦୮ | DN15, 1/2″ |
| Design Pressure | ବି୦୨୦୦୮ | DN20, 3/4″ | ଏଚଏଲପିଡି |
| ବି୦୨୫୦୮ | ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: | ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: | ସୁପାରିଶ କରାଯାଇଛି ≤ DN25 କିମ୍ବା 1″। କିମ୍ବା ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବାୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର (DN10, 3/8″ ରୁ DN80, 3″), ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର VIP (DN10, 3/8″ ରୁ DN500, 20″) ଚୟନ କରେ। |
| ବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: | HL କ୍ରାୟୋଜେନିକ୍ ଉପକରଣର ଏଣ୍ଟରପ୍ରାଇଜ୍ ମାନକ ଦ୍ୱାରା ସୁପାରିଶ କରାଯାଇଛି। ଏହା ଗ୍ରାହକଙ୍କ ଆବଶ୍ୟକତା ଅନୁସାରେ ମଧ୍ୟ ଉତ୍ପାଦନ କରାଯାଇପାରିବ। | ||
| ଡିଜାଇନ୍ ଚାପ: | ସୁପାରିଶ କରାଯାଇଥିବା ≤ 8 ବାର୍। କିମ୍ବା ଫ୍ଲାଞ୍ଜେସ୍ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବେୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର (≤16 ବାର୍), ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (≤64 ବାର୍) ଚୟନ କରେ। | ||
| Material | ଉର୍ଦ୍ଦୁ | ||
| ଶକ୍ତି ଅବସ୍ଥା: | LN2ସାଇଟକୁ ଭାକ୍ୟୁମ୍ ପମ୍ପଗୁଡ଼ିକୁ ବିଦ୍ୟୁତ୍ ଯୋଗାଣ କରିବାକୁ ପଡିବ ଏବଂ HL କ୍ରାୟୋଜେନିକ୍ ଇକ୍ୟୁପମେଣ୍ଟକୁ ସ୍ଥାନୀୟ ବିଦ୍ୟୁତ୍ ସୂଚନା (ଭୋଲଟେଜ୍ ଏବଂ ହର୍ଜ୍) ଜଣାଇବାକୁ ପଡିବ।2୩.୨.୨ ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବେୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର | ||
ଓଡେଲ୍
ସଂଯୋଗ
ପ୍ରକାର
ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ
| ଡିଜାଇନ୍ ଚାପ | ସାମଗ୍ରୀ | |
| ଭିତର ପାଇପର | ମାନାଙ୍କ | ମନ୍ତବ୍ୟ |
| ଏଚ୍.ଏଲ୍.ପି. | ଡିଏଫ୦୧୦ | ୦୦X |
| ସ୍ଥିର ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ପାଇପିଂ ସିଷ୍ଟମ୍ ପାଇଁ ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବାୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର | ଭିତର ପାଇପର ସାମଗ୍ରୀ। | ଭିତର ପାଇପର ସାମଗ୍ରୀ। |
| 300 ସିରିଜ୍ ଷ୍ଟେନଲେସ୍ ଷ୍ଟିଲ୍ | ଭିତର ପାଇପର ସାମଗ୍ରୀ। | ଭିତର ପାଇପର ସାମଗ୍ରୀ। |
| ଭିତର ପାଇପର ସାମଗ୍ରୀ। | ଭିତର ପାଇପର ସାମଗ୍ରୀ। |
A ହେଉଛି 304,
B ହେଉଛି 304L,
C ହେଉଛି 316,
D ହେଉଛି 316L,
E ହେଉଛି ଅନ୍ୟ।
ଏଚଏଲପିଡି
F015
୦୦X
DN15, 1/2″
ଏଚଏଲପିଡି
F020
୦୦X
Nominal Diameter of Inner Pipe
ଏଚଏଲପିଡି
DN25, 1″
୦୦X
DN25, 1″
ଏଚଏଲପିଡି
Design Pressure
୦୦X
ଡିଏନ୩୨, ୧-୧/୪″
ଏଚଏଲପିଡି
F040
୦୦X
DN40, 1-1/2″
ଏଚଏଲପିଡି
F050
୦୦X
ଡିଏନ୫୦, ୨″
ଏଚଏଲପିଡି
F065
୦୦X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ସୁପାରିଶ କରାଯାଇଥିବା ≤ 16 ବାର୍। କିମ୍ବା ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (≤64 ବାର୍) ଚୟନ କରେ।X | ହିବ୍ରୁ | DN10, 3/8″ | ହଙ୍ଗେରୀୟ
| ଉର୍ଦ୍ଦୁ | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ଲାଟଭିଆନ୍X | DN15, 1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ମାସିଡୋନିୟX | DN20, 3/4″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ମାଲାୟଲମX | DN25, 1″ |
Nominal Diameter of Inner Pipe:ମରାଠୀ
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ନରୱେଜିଆନ୍
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
B ହେଉଛି 304L,
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩DN20, 3/4″00X | ତେଲୁଗୁ | DN10, 3/8″ | ୟୁକ୍ରାନିଆନ୍ | ଉର୍ଦ୍ଦୁ | ASME B31.3 | 00: ୦୦X 08 is 8bar, ଖୋସା
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ଉଇଘୁର୍00X | DN15, 1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F02000X | DN20, 3/4″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F02500X | DN25, 1″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F03200X | DN32, 1-1/4″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F04000X | DN40, 1-1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F05000X | DN50, 2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F06500X | DN65, 2-1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩F08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ଡିଏନ୫୦୦, ୨୦″
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ବାହ୍ୟ ପାଇପର ସାମଗ୍ରୀ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ପରବର୍ତ୍ତୀ:00X | ଚାଇନା ପାଣି ଭର୍ତ୍ତି ମେସିନ୍ | DN10, 3/8″ | 8~64 bar | ଉର୍ଦ୍ଦୁ | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ଆମ ସହିତ ଯୋଗାଯୋଗ କରନ୍ତୁ00X | DN15, 1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ପାଇପ୍ ସିରିଜ୍00X | DN20, 3/4″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ଫେଜ୍ ସେପାରେଟର୍ ସିରିଜ୍00X | DN25, 1″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩W03200X | DN32, 1-1/4″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩W04000X | DN40, 1-1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩W05000X | DN50, 2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩W06500X | DN65, 2-1/2″ | |||||
| +୮୬ ୧୮୦୯୦୧୧୧୬୪୩W08000X | DN80, 3″ | |||||
| Hଫରାସୀ00X | DN100, 4″ | |||||
| Hସ୍ପାନିସ୍00X | DN125, 5″ | |||||
| Hକୋରୀୟ00X | DN150, 6″ | |||||
| Hଗ୍ରୀକ୍00X | DN200, 8″ | |||||
| Hଡାନିସ୍00X | DN250, 10″ | |||||
| Hଚେକ୍00X | DN300, 12″ | |||||
| Hପୋଲିସ୍00X | DN350, 14″ | |||||
| Hଇସପେରାଣ୍ଟୋ00X | DN400, 16″ | |||||
| Hଆଲବାନିଆନ୍00X | DN450, 18″ | |||||
| Hଆଜରବୈଜାନି00X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
କୋରସିକାନ୍
କ୍ରୋଏସୀୟ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPହାୱାଇଆନ୍X | ହିବ୍ରୁ | DN10, 3/8″ | ହଙ୍ଗେରୀୟ | ଉର୍ଦ୍ଦୁ | ASME B31.3 | X:ଜାଭାନିଜ୍ B is 304L, C is 316, D is 316L, E is other. |
| HLPDଲାଟଭିଆନ୍X | DN15, 1/2″ | |||||
| HLPDମାସିଡୋନିୟX | DN20, 3/4″ | |||||
| HLPDମାଲାୟଲମX | DN25, 1″ |
Nominal Diameter of Inner Pipe:ମରାଠୀ
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ନରୱେଜିଆନ୍
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
ସେସୋଥୋ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPତାଜିକ୍00X | ତେଲୁଗୁ | DN10, 3/8″ | ୟୁକ୍ରାନିଆନ୍ | ଉର୍ଦ୍ଦୁ | ASME B31.3 | 00: ଭିଏତନାମିୟ ଖୋସା
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDଉଇଘୁର୍00X | DN15, 1/2″ | |||||
| HLPDF02000X | DN20, 3/4″ | |||||
| HLPDF02500X | DN25, 1″ | |||||
| HLPDF03200X | DN32, 1-1/4″ | |||||
| HLPDF04000X | DN40, 1-1/2″ | |||||
| HLPDF05000X | DN50, 2″ | |||||
| HLPDF06500X | DN65, 2-1/2″ | |||||
| HLPDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤64 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Piping System | DN10, 3/8″ | 8~64 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00:Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDW01500X | DN15, 1/2″ | |||||
| HLPDW02000X | DN20, 3/4″ | |||||
| HLPDW02500X | DN25, 1″ | |||||
| HLPDW03200X | DN32, 1-1/4″ | |||||
| HLPDW04000X | DN40, 1-1/2″ | |||||
| HLPDW05000X | DN50, 2″ | |||||
| HLPDW06500X | DN65, 2-1/2″ | |||||
| HLPDW08000X | DN80, 3″ | |||||
| HLPDW10000X | DN100, 4″ | |||||
| HLPDW12500X | DN125, 5″ | |||||
| HLPDW15000X | DN150, 6″ | |||||
| HLPDW20000X | DN200, 8″ | |||||
| HLPDW25000X | DN250, 10″ | |||||
| HLPDW30000X | DN300, 12″ | |||||
| HLPDW35000X | DN350, 14″ | |||||
| HLPDW40000X | DN400, 16″ | |||||
| HLPDW45000X | DN450, 18″ | |||||
| HLPDW50000X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)We insist on the principle of development of ‘High quality, Efficiency, Sincerity and Down-to-earth working approach’ to provide you with excellent service of processing for 2019 New Style China 4.8kw Electric Beer Juice Nitrogen Tin Can Filling Sealing Line Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
2019 New Style China Water Filling Machine, Machine, We have been proud to supply our goods to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
