F065
ବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ:
- HL କ୍ରାୟୋଜେନିକ୍ ଉପକରଣର ଏଣ୍ଟରପ୍ରାଇଜ୍ ମାନକ ଦ୍ୱାରା ସୁପାରିଶ କରାଯାଇଛି। ଏହା ଗ୍ରାହକଙ୍କ ଆବଶ୍ୟକତା ଅନୁସାରେ ମଧ୍ୟ ଉତ୍ପାଦନ କରାଯାଇପାରିବ।
- ଡିଜାଇନ୍ ଚାପ:
- ସୁପାରିଶ କରାଯାଇଥିବା ≤ 16 ବାର୍। କିମ୍ବା ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (≤40 ବାର୍) ଚୟନ କରେ।
- ବାହ୍ୟ ପାଇପର ସାମଗ୍ରୀ
ବିଶେଷ ଆବଶ୍ୟକତା ବିନା, ଭିତର ପାଇପ୍ ଏବଂ ବାହ୍ୟ ପାଇପ୍ ର ସାମଗ୍ରୀ ସମାନ ଭାବରେ ଚୟନ କରାଯିବ।
୩.୧.୩ ୱେଲ୍ଡିଂ ସଂଯୋଗ ପ୍ରକାର
ଓଡେଲ୍
ସଂଯୋଗ
ପ୍ରକାର
ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ
ଡିଜାଇନ୍ ଚାପ
ସାମଗ୍ରୀ
ଭିତର ପାଇପର
ମାନାଙ୍କ
ମନ୍ତବ୍ୟ
ୱ୦୧୦
୦୦X
ସ୍ଥିର ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ନମନୀୟ ନଳୀ ପାଇଁ ୱେଲ୍ଡେଡ୍ ସଂଯୋଗ ପ୍ରକାର
ଡିଏନ୧୦, ୩/୮"
୮~୪୦ ବାର୍
300 ସିରିଜ୍ ଷ୍ଟେନଲେସ୍ ଷ୍ଟିଲ୍
ASME B31.3
| V | ଡିଏନ୨୦, ୩/୪" | ଡିଏନ୨୫, ୧" | ବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: | |
| ଡିଜାଇନ୍ ଚାପ | ଭିତର ପାଇପର ସାମଗ୍ରୀ। | A ହେଉଛି 304, | ଡିଏନ୪୦, ୧-୧/୨" | C ହେଉଛି 316, |
| D ହେଉଛି 316L, | HLHS | HLHS | W015 | ୦୦X |
| ଡିଏନ୧୫, ୧/୨" | No | No | HLHS | ଡିଜାଇନ୍ ଚାପ |
| Nominal Diameter of Inner Pipe | ୦୦X | HLHS | W025 | ୦୦X |
| Design Pressure | HLHS | ଡିଏନ୩୨, ୧-୧/୪" | ୦୦X | ଡିଏନ୩୨, ୧-୧/୪" |
| HLHS | HLHS | HLHS | ଡିଏନ୪୦, ୧-୧/୨" | HLHS |
| ସୁପାରିଶ କରାଯାଇଛି ≤ DN25 କିମ୍ବା 1"। କିମ୍ବା ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବାୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର (DN10, 3/8" ରୁ DN80, 3"), ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (DN10, 3/8" ରୁ DN150, 6") ଚୟନ କରେ। | ୦୦X | |||
| ଡିଏନ୫୦, ୨" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| ମାନାଙ୍କ | LN2HLHS2W080 | |||
୦୦X
ଡିଏନ୮୦, ୩"
| ଏଲଏଚଏସଡବ୍ଲୁ୧୦୦ | |
| ୦୦X | |
| ଡିଏନ ୧୦୦, ୪" |  |
LHSW125
| ୦୦X | DN125, 5" | LHSW150 | ୦୦X | DN150, 6" | ବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: |
| HL କ୍ରାୟୋଜେନିକ୍ ଉପକରଣର ଏଣ୍ଟରପ୍ରାଇଜ୍ ମାନକ ଦ୍ୱାରା ସୁପାରିଶ କରାଯାଇଛି। ଏହା ଗ୍ରାହକଙ୍କ ଆବଶ୍ୟକତା ଅନୁସାରେ ମଧ୍ୟ ଉତ୍ପାଦନ କରାଯାଇପାରିବ। | ବାହ୍ୟ ପାଇପର ସାମଗ୍ରୀ | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" |
| ପ୍ରକାର | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | |
| ମାନାଙ୍କ | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | |
| ଡିଏନ୧୦, ୩/୮" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | |
| ଡିଜାଇନ୍ ଚାପ। | / | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | / | |
| ଭିତର ପାଇପର ସାମଗ୍ରୀ। | / | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | / | |
| C ହେଉଛି 316, | / | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | / | |
| HLHS | / | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | / | |
| ଡିଏନ୧୫, ୧/୨" | / | ଡିଏନ୨୫, ୧" | ଡିଏନ୨୫, ୧" | / | |
| ୦୦X | / | / | ଡିଏନ୨୫, ୧" | / | |
| HLHS | / | / | ଡିଏନ୨୫, ୧" | / | |
| ୦୦X | / | / | ଡିଏନ୨୫, ୧" | / |
ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ:
| ସୁପାରିଶ କରାଯାଇଛି ≤ DN25 କିମ୍ବା 1"। କିମ୍ବା ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବାୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର (DN10, 3/8" ରୁ DN80, 3"), ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (DN10, 3/8" ରୁ DN150, 6") ଚୟନ କରେ। | ବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: |
| HL କ୍ରାୟୋଜେନିକ୍ ଉପକରଣର ଏଣ୍ଟରପ୍ରାଇଜ୍ ମାନକ ଦ୍ୱାରା ସୁପାରିଶ କରାଯାଇଛି। ଏହା ଗ୍ରାହକଙ୍କ ଆବଶ୍ୟକତା ଅନୁସାରେ ମଧ୍ୟ ଉତ୍ପାଦନ କରାଯାଇପାରିବ। | ଡିଜାଇନ୍ ଚାପ: |
| ସୁପାରିଶ କରାଯାଇଥିବା ≤ 16 ବାର୍। କିମ୍ବା ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (≤40 ବାର୍) ଚୟନ କରେ। | ବାହ୍ୟ ପାଇପର ସାମଗ୍ରୀବିଶେଷ ଆବଶ୍ୟକତା ବିନା, ଭିତର ପାଇପ୍ ଏବଂ ବାହ୍ୟ ପାଇପ୍ ର ସାମଗ୍ରୀ ସମାନ ଭାବରେ ଚୟନ କରାଯିବ।୩.୨ ଗତିଶୀଳ ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ପାଇପିଂ ସିଷ୍ଟମ୍3/S |
| ୩.୨.୧ କ୍ଲାମ୍ପ ସହିତ ଭାକ୍ୟୁମ୍ ବେୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର | ଓଡେଲ୍ |
| ସଂଯୋଗ | ପ୍ରକାର |
| ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ | ଡିଜାଇନ୍ ଚାପ |
| ସାମଗ୍ରୀ | ଭିତର ପାଇପର |
| ମାନାଙ୍କ | ମନ୍ତବ୍ୟ |
ଏଚଡିବି୦୧୦୦୮
ଗତିଶୀଳ ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ନମନୀୟ ହୋସ୍ ପାଇଁ କ୍ଲାମ୍ପ ସହିତ ଭାକ୍ୟୁମ୍ ବାୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର
lଡିଏନ୧୦, ୩/୮"
l8 ବାର୍
| 300 ସିରିଜ୍ ଷ୍ଟେନଲେସ୍ ଷ୍ଟିଲ୍ C ହେଉଛି 316, | ଭିତର ପାଇପର ସାମଗ୍ରୀ। | |
| A ହେଉଛି 304, | B ହେଉଛି 304L,C ହେଉଛି 316,D ହେଉଛି 316L, | |
| E ହେଉଛି ଅନ୍ୟ। | ଏଚ୍ଏଲ୍ଏଚ୍ | ଡିବି୦୧୫୦୮ |
| ଡିଏନ୧୫, ୧/୨" | ଡିଜାଇନ୍ ଚାପ: | ଡିଜାଇନ୍ ଚାପ: |
| ଡିଏନ୨୦, ୩/୪" | ଡିଜାଇନ୍ ଚାପ: | ଡିଜାଇନ୍ ଚାପ: |
| ଡିଏନ୨୫, ୧" | ଡିଜାଇନ୍ ଚାପ: | ଡିଜାଇନ୍ ଚାପ: |
| ବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ: | ଡିଜାଇନ୍ ଚାପ: | ଡିଜାଇନ୍ ଚାପ: |
ସୁପାରିଶ କରାଯାଇଥିବା ≤ 8 ବାର୍। କିମ୍ବା ଫ୍ଲାଞ୍ଜେସ୍ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବେୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର (≤16 ବାର୍), ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (≤40 ବାର୍) ଚୟନ କରେ।ବାହ୍ୟ ପାଇପର ସାମଗ୍ରୀବିଶେଷ ଆବଶ୍ୟକତା ବିନା, ଭିତର ପାଇପ୍ ଏବଂ ବାହ୍ୟ ପାଇପ୍ ର ସାମଗ୍ରୀ ସମାନ ଭାବରେ ଚୟନ କରାଯିବ।
ଶକ୍ତି ଅବସ୍ଥା:
HL-HX-X-ଏହି ସ୍ଥାନକୁ ଭାକ୍ୟୁମ୍ ପମ୍ପଗୁଡ଼ିକୁ ବିଦ୍ୟୁତ୍ ଯୋଗାଣ କରିବାକୁ ପଡିବ ଏବଂ HL କ୍ରାୟୋଜେନିକ୍ ଇକ୍ୟୁପମେଣ୍ଟକୁ ସ୍ଥାନୀୟ ବିଦ୍ୟୁତ୍ ସୂଚନା (ଭୋଲଟେଜ୍ ଏବଂ ହର୍ଜ୍) ଜଣାଇବାକୁ ପଡିବ।-00-X
୩.୨.୨ ଫ୍ଲାଞ୍ଜ ଏବଂ ବୋଲ୍ଟ ସହିତ ଭାକ୍ୟୁମ୍ ବେୟୋନେଟ୍ ସଂଯୋଗ ପ୍ରକାର
ଓଡେଲ୍
ସଂଯୋଗ
ପ୍ରକାର
ଭିତର ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ
ଡିଜାଇନ୍ ଚାପ
ସାମଗ୍ରୀ
ଭିତର ପାଇପର
ମାନାଙ୍କ
ମନ୍ତବ୍ୟ
Nominal Diameter of Inner Pipe
୦୦X
୮~୧୬ ବାର୍
ଡିଏନ୧୦, ୩/୮"
୮~୧୬ ବାର୍
300 ସିରିଜ୍ ଷ୍ଟେନଲେସ୍ ଷ୍ଟିଲ୍
Design Pressure
ଡିଜାଇନ୍ ଚାପ।
୦୮ ହେଉଛି ୮ବାର,
୧୬ ହେଉଛି ୧୬ବାର।
ଭିତର ପାଇପର ସାମଗ୍ରୀ।
A ହେଉଛି 304,
B ହେଉଛି 304L,
C ହେଉଛି 316,
D ହେଉଛି 316L,
E ହେଉଛି ଅନ୍ୟ।
F015
୦୦X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ଫେଜ୍ ସେପାରେଟର୍ ସିରିଜ୍ | DN10, 3/8" | ଆର୍ମେନିଆନ୍
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ଫରାସୀବାହ୍ୟ ପାଇପର ନାମମାତ୍ର ବ୍ୟାସ:X | DN15, 1/2" | |||||
| ଫରାସୀସୁପାରିଶ କରାଯାଇଥିବା ≤ 16 ବାର୍। କିମ୍ବା ୱେଲ୍ଡଡ୍ ସଂଯୋଗ ପ୍ରକାର (≤40 ବାର୍) ଚୟନ କରେ।X | DN20, 3/4" | |||||
| ଫରାସୀଶକ୍ତି ଅବସ୍ଥା:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ଆଇସଲାଣ୍ଡିକ୍
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| ଫରାସୀ୦୮ ହେଉଛି ୮ବାର,00X | ଏବଂ 25, 32, 40। | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ଫରାସୀସାମୋଆନ୍00X | DN15, 1/2" | |||||
| ଫରାସୀସିନ୍ଧି00X | DN20, 3/4" | |||||
| ଫରାସୀତାଜିକ୍00X | DN25, 1" | |||||
| ଫରାସୀଥାଇ00X | DN32, 1-1/4" | |||||
| ଫରାସୀଉଜବେକ୍00X | DN40, 1-1/2" | |||||
| ଫରାସୀଖୋସା00X | DN50, 2" | |||||
| ଫରାସୀଜୁଲୁ00X | DN65, 2-1/2" | |||||
| ଫରାସୀଓଡ଼ିଆ00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ଶକ୍ତି ଅବସ୍ଥା:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS୦୦X00X | ଡିଏନ୧୦, ୩/୮" | DN10, 3/8" | 300 ସିରିଜ୍ ଷ୍ଟେନଲେସ୍ ଷ୍ଟିଲ୍ | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ଫରାସୀଡିଏନ୧୫, ୧/୨"00X | DN15, 1/2" | |||||
| ଫରାସୀଡିଏନ୨୦, ୩/୪"00X | DN20, 3/4" | |||||
| ଫରାସୀଡିଏନ୨୫, ୧"00X | DN25, 1" | |||||
| ଫରାସୀW03200X | DN32, 1-1/4" | |||||
| ଫରାସୀW04000X | DN40, 1-1/2" | |||||
| ଫରାସୀW05000X | DN50, 2" | |||||
| ଫରାସୀW06500X | DN65, 2-1/2" | |||||
| ଫରାସୀW08000X | DN80, 3" | |||||
| Hଭାକ୍ୟୁମ୍ ଜ୍ୟାକେଟ୍ ହୋସ୍00X | DN100, 4" | |||||
| Hଚୀନ୍ ତରଳ ଅମ୍ଳଜାନ ପ୍ରବାହ ନିୟନ୍ତ୍ରଣ ଭାଲ୍ଭ00X | DN125, 5" | |||||
| Hହୋଲସେଲ ମୂଲ୍ୟ ଚୀନ୍ ଚୀନ୍ ISO ମାନକ ଟ୍ୟାଙ୍କ୍ 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSଗତିଶୀଳ ଭାକ୍ୟୁମ୍ ପମ୍ପ ସିଷ୍ଟମ୍00X | ଭାକ୍ୟୁମ୍ ଇନ୍ସୁଲେଟେଡ୍ ଫେଜ୍ ସେପାରେଟର୍ ସିରିଜ୍ | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ଫରାସୀହ୍ୱାଟ୍ସଆପ୍00X | DN15, 1/2" | |||||
| ଫରାସୀୱିଚାଟ୍00X | DN20, 3/4" | |||||
| ଫରାସୀଜର୍ମାନ00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ଗ୍ରୀକ୍
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ଡାନିସ୍
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLଲାଓX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | ଆର୍ମେନିଆନ୍
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHଏଷ୍ଟୋନିଆନ୍X | DN15, 1/2" | |||||
| HLHଫ୍ରିଜିଆନ୍X | DN20, 3/4" | |||||
| HLHଗୁଜୁରାଟୀX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ଆଇସଲାଣ୍ଡିକ୍
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLମାଲାୟଲମ00X | ମାଓରି | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDସାମୋଆନ୍00X | DN15, 1/2" | |||||
| HLHDସିନ୍ଧି00X | DN20, 3/4" | |||||
| HLHDତାଜିକ୍00X | DN25, 1" | |||||
| HLHDଥାଇ00X | DN32, 1-1/4" | |||||
| HLHDଉଜବେକ୍00X | DN40, 1-1/2" | |||||
| HLHDଖୋସା00X | DN50, 2" | |||||
| HLHDଜୁଲୁ00X | DN65, 2-1/2" | |||||
| HLHDଓଡ଼ିଆ00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
